Verex MONITOR AFx Guida Utente Scaricare il pdf (Pagina 257)

500-9041 v4.1

Welcome Report Control Admin Sys Config

Tech-Ref

251

symbol (for HyperTerminal's selection

window). Then, click

[Ok]

.

4)

At the bottom of the next screen, select

"Direct to ComX" (i.e., the port that you'll

be connecting the modem to).

Then, click

[Ok]

.

5)

In the next screen, select:

Bits per Second:

Data Bits:

Parity:

Stop Bits:

Flow Control:

38400

8

None

1

None

...and, click

[Ok]

.

6)

From the

File

menu, select

Properties

,

and the

Settings

tab.

7)

Then, click

[ASCII Setup]

, and select

"Echo typed characters locally".

8)

Now click

[Ok]

to close each of the two

screens.

9)

Connect the modem to the previously-

selected serial port on the computer, and

supply power to the modem using its plug-

in transformer.

10)

Now, type "

at

" (lower-case as shown, and

without the quote marks), and press

Enter

.

You should see the "at" appear as you

type it, and a response of "OK" when you

press "Enter".

If nothing appears on-screen, this may mean that

you didn't select the "Echo typed..." setting as

described previously, or that the modem is either

not powered up, or is plugged into a serial port

that doesn't match your selection. (You can select

a different port by selecting

File

, and

Properties

,

and changing the setting for "Connect Using" at

the bottom of the screen.) The modem not

responding may also indicate a problem with your

cable or it not being plugged in correctly.

11)

(Do not proceed until you have your

modem responding with "OK".)

12)

Now, enter the settings that pertain to your

modem:

USR Sportster56k:

AT&F&B1S0=1Y0&W0

LASAT Safire 560™ Voice Modem

:

AT&F0S0=1&D0&Y0&W0&W1

Tip:

Uppercase as shown;

0

=

zero

)

Carefully check that you have typed the

characters correctly, and then press

Enter

. (Look for the modem to respond

with "OK".)

13)

Now, power the modem down (i.e.,

remove power from the modem).

14)

The modem is now ready to be used with

a system panel. You can unplug the

modem and shut down the HyperTerminal

program when ready. To shut down

HyperTerminal, open the

File

menu, and

select

Exit

. (If prompted to save your

changes, select

Yes

.)

Tip:

If you need to set up another modem in the

future, you can open your saved session instead

of setting up a new one.

Reference Information:

Modem Commands Used Above

USR Sportster56k

Code

Meaning

AT

Modem command identifier.

&F

Reset (now) to default profile

&B1

Fixed serial port rate.

S0=1

Auto-answer one the first ring.

Y0

Use 'Profile 0' during power-up.

&W0

Saves your settings in profile zero.

LASAT Safire 560™ Voice Modem

Code

Meaning

AT

Modem command identifier.

&F0

Reset (now) to profile zero.

S0=1

Auto-answer one the first ring.

&D0

DTR override

&Y0

Use 'Profile 0' during power-up.

&W0

Saves your settings in profile zero.

&W1

Saves your settings in memory

profile 1.

1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 323 324

Commenti su questo manuale

Nessun commento