Verex MONITOR AFx Guida Utente Scaricare il pdf (Pagina 200)

194

MONITOR AFx™ Director V4.1 User's Guide

500-9041 v4.1

If you change any value for a reader/door, this will

cause that device to be reset to its default /

scheduled state (this allows configuration updates to

be managed properly). To check or re-set status

aspects, refer to the "Door" status/control topic.

Introduction to Access-Controlled

Doors

"Access-control" (who can go where and

when) can be easily integrated into the system

using door-control modules. This controlled

access can be added for up to

doors per

panel (with 1 or 2 readers per door).

Door capacity and type(s) of door controllers supported

depends on your software licensing agreement, which

is managed through the 'activation key' on the parallel

(or USB) port of the server (or only) PC (and the

licensing software provided).

Elevators: The door capacity is shared with elevators

(max. 32 combined). Elevators also share the door

numbering (and panel memory space), and will be

listed along with the doors (editable under "Elevator"

only). Tip: You can define elevators at the end of the

list, or click

[Filter]

on the toolbar to show only the

numbers associated with doors.

Also See:

Elevators (Lifts) and Associated Readers.

The entry-requirements for each reader / door

can be configured to meet your specific

requirements. As well, many items can be set

to a rotating schedule, allowing different

parameters to be in effect after-hours.

To read an overview on how access-controlled doors

operate relative to user-authority settings and area

settings, refer to "Understanding Access-Controlled

Areas".

Two card types can be set up, allowing either Wiegand

/ Prox and Magstripe / barcode, or two types of

Wiegand / Prox cards to be supported (at the same

time) at each specific panel. For details on setting up

the card/token format, refer to "System Card-Access

Settings".

Wiegand-output reader keypads are supported for

Card+PIN (and PIN-Only) entry modes and signalling

duress. Matrix-style keypads (i.e., that require

additional connections) are supported only via

converted TDC and PDC door controllers.

To set up monitoring for an Entry/Exit door that is NOT

electronically controlled for personnel access, refer to

"Inputs—Monitored Sensors".

Accessing the Door Configuration Topic

(Multi-

Account

Systems: Click

[Account Folders]

the 'tree', and locate and double-click the desired

account.)

Select

Doors

from the MyTools bar,

click

your site/account button in the tree, open

"Configuration" (

), and select

Doors

(Under the specific panel group and panel--if listed in

the 'tree'.)

Panel Groups and Panels: The 'tree' can be set to

show configuration topics in a single list (logical tree

view), or on a panel-by-panel basis (best for multi-panel

systems). For details, refer to "Other Desktop

Choices".

Adding a Door to the System

(Before adding a door, the applicable door-controller

module should be set up. For details, refer to

"Expansion Modules".)

Access "Configuration Doors" as described

previously, and use the

Grid

Form

toolbar-

button to select your preferred 'view'.

Forms view: Details for one door at a time;

Grid View: All defined doors in a list.

Now, click

[+]

at the bottom of the form, or

right-click the form, and select

Add New

from

the pop-up menu.

Alternative: You can also select a blank/grey item from

the list (Forms view: bottom of the window). If no grey

ones are listed (or the form is blank), click

Filter

on the

toolbar, and re-check the listing.

Now, refer to the selection-descriptions for this

portion of the door screen while entering

and/or selecting your desired settings.

Tip:

Check the 'Standard' and 'Reader' tabs for basic

settings. (Additional tabs contain optional features.)

Tip:

You can copy all settings for a Door, and paste

them into another one: Right-click the 1

one (a blank

area if in 'Forms' view), and select

Copy

. Then, select

a blank/new door from the list, right-click again, and

select

Paste

. After 'pasting', change the name and any

settings as desired.

Note:

'Copy' and 'P

aste' are also

available from the

Edit

menu.

Doors, Readers, and Related Settings

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 323 324

Verex MONITOR AFx Guida Utente Pagina 200

Commenti su questo manuale

Verex MONITOR AFx Guida Utente Pagina 200

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Verex MONITOR AFx