Verex Monitor ISM Guida di Installazione Scaricare il pdf (Pagina 17)

21-3601E rev1.3 xL Simplified Installation Guide 11

Simplified is chosen, ordinary language menus will

appear to browse through and make selections to

make a basic system from. If Advanced is chosen,

special menus will appear to customize the system

into several unique forms of security requirements.

Logging On to a New UK ACPO System

• After the “CommsLost” keypad screen and 24822

has been entered, the screen will display that the

system is in alarm and needs to be re-set.

• Enter the UK service user code: 000 and PIN:

1630.

• A user code and PIN for a second user will be

requested. Enter the Master User default code: 001

and PIN: 7793.

• The next screen will request the date and time to

be entered.

• The next screen will display that the system is in

alarm and enter ID to restore it.

• The Master User codes can be entered however, if

a service user enters 000, the next screen will

request a Pin of the Day to log on. After that is

entered, a secondary user code will be requested.

The Master user codes can be used again.

UK ACPO Pin of the Day

• The service user will call the Pin of the Day

program operator who can enter default “24822” as

the new system’s default Dealer ID until a unique

one can be entered at the keypad or downloaded

from the Director software later.

• The service user enters random, 6 digit Pin of the

Day number given to them by the operator at the

keypad and can then access the system menus

and configurations.

Also see Pin of the Day in the Advanced Installation

Guide

Remote Connection

• If a Remote connection is selected, the next screen

will display a left or right arrow selection for IP or

the version of modem board plugged into the main

control module (e.g. Bell 103 or World Wide

Modem, discussed later). IMPORTANT: When one

of the modems is used, it must be plugged into the

main control module before remote connection

screens can be viewed. Press the button below Ok.

• The next screen will ask to “Select country” for the

style of system configurations that are required for

different places in the world. Use the left-right arrow

keys to toggle through them. The selections are: N

(North) America, European, U.K., Aus/NZ

(Australia, New Zealand) and China/H.K (Hong

Kong). Press the button below Ok.

• The next screen will display an entry for a 6 digit

unique ID to identify this particular system.

000000

↓Save (unique id)

• Press the button below

“Save” when the selection

has been made.

• The next screen will display an entry for a 6 digit

third party password. This is a special security

number that prevents unauthorized connection to

this main control module.

000000

↓Save (3rdPtPass)

• Press the button below

“Save” when the selection

has been made.

• Next enter the phone number to contact and get a

system program, configuration download from the

Director Software computer.

The phone number can be preceded with P =pulse dialing

(default), or T =Tone dialing, and can include D =2 sec Delay, A

=Star key (tone dialing), # = Pound Sign (tone dialing), and/or W =

Wait for second dial tone. For Tone dialing, ensure the phone line

supports this. As the phone number is entered, the cursor will

automatically move to the next character entry position. Use the

left and right arrow keys to move the cursor back and forth in the

entry. Place the cursor under a character where a blank is

desired. Press the “_” selection on the “ 0 Z_Q ” keypad key to

replace the character with a blank space.

↓Save (cfg tel #)

• Press the button below

“Save” when the selection

has been made.

Download Config

Please wait......

• When Save is pressed,

the main control module

will attempt to dial the

config PC.

Download Config

Dialing......

While the main control module is trying to get its

download, an asterisk: “

Â” will appear between the

hour and the minute display on the time and date main

screen.

Manually calling the Director PC from the

LCD Keypad:

• This operation is for systems that can communicate

with the Director software.

• If the system configurations have been changed

example: by the customer to add a new user, it will

be necessary to update the Director configurations

for the system.

1) The system Unique ID and 3

Party Password

have to be programmed in the system if they were

not previously. See the Advanced programming

guide to program them in Advanced configurations

using the keypad. To enable this feature, “Config

Dial Out” is set to “1” in Advanced program section

S005:10.

2) Log on to the keypad as a system or service user.

3) Push the right arrow key for Menus.

Menu Options

◄ Director

► ↓Ok

4) Use the left and right

arrow keys to browse

the menu until “Director”

displays. Press Ok.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Commenti su questo manuale

Nessun commento

Verex Monitor ISM Guida di Installazione Pagina 17

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Verex Monitor ISM